Husqvarna MADSAW 525iDEPS Manual De Usuario página 19

• Whenever possible position yourself so
that you can make the cut at right angles to
the branch.
• Do not work with the shaft held straight
out in front of you as this increases the
apparent weight of the cutting attachment.
• Cut large branches in sections so that you
have better control over where they fall.
• Never cut through the swelling at the root
of the branch as this will slow down healing
and increase the risk of fungal attack.
1744 - 008 -
• Use the stop at the base of the
cutting head to provide support during
cutting. This will help prevent the cutting
attachment from bouncing on the branch.
• Make an initial cut on the underside of
the branch before cutting through the
branch. This will prevent tearing of the
bark, which could lead to slow healing
and cause permanent damage to the tree.
The cut should not be deeper than ⅓ of
the branch thickness to prevent jamming.
Keep the chain running while you withdraw
the cutting attachment from the branch to
prevent it jamming.
Husqvarna Fleet Services
Husqvarna Fleet Services
that gives the commercial fleet manager
an overview of all products. It is also
possible for the fleet managers to get remote
access to information about the product.
For more information about Husqvarna Fleet
™
Services , refer to www.husqvarna.com.
®
Bluetooth wireless technology
Products with built-in Bluetooth
technology can connect to mobile devices and
enables additional functions from Husqvarna
Connect.
Bluetooth
The symbol for
technology comes on when your mobile
device is connected to the product.
™
™
is a cloud solution
®
wireless
®
wireless
19