Problem
Red error LED
flashes.
The product does
not start.
Red error LED
comes on.
Battery
LED display
Green activate LED flash-
ing
Error LED flashing
Error LED is lit
Battery charger
Problem
Red error LED flashes.
Red error LED comes on.
28
Possible faults
Overload.
Temperature deviation.
The power trigger and the start but-
ton are pushed at the same time.
Dirt in the battery connectors.
It is necessary to do servicing on the
product.
Possible faults
Low battery voltage.
The battery is discharged.
Temperature deviation.
Cell difference is too much
(1V).
Possible faults
Temperature deviation.
Possible solution
The cutting attachment is blocked.
stop the product. Remove the bat-
tery. Clean the cutting attachment
from unwanted materials. Loosen the
chain.
Let the product become cool.
Release the power trigger and push
the start button.
Clean the battery connectors with
compressed air or a soft brush.
Speak to your servicing dealer.
Possible action
Charge the battery.
Charge the battery.
Use the battery in surroundings
where temperatures are between
-10°C (14°F) and 40°C (104°F).
Contact your servicing agent.
Possible solution
Use the battery charger in
temperatures between 5 °C
(41 °F) and 40 °C (104 °F).
Speak to your servicing deal-
er.
1744 - 008 -