Publicidad
Idiomas disponibles
Idiomas disponibles
Inspection of components
After reprocessing, carefully inspect all components for damage and residuals or excessive
wear and replace if necessary. Some methods may cause discoloration of rubber
components without impact on their lifetime. In case of material deterioration, e.g.
cracking, the components should be discarded and replaced with a new component.
In case of sterilization, the oxygen reservoir bag can look slightly wrinkled. This has no
impact on its lifetime or function.
Reassembly
Manually reassemble the components of the resuscitator as shown in
•
When inserting the valve housing of the inlet valve, make sure that the bag opening
seats smoothly against the flange.
•
When inserting the valve discs, make sure the butt of the stem is pushed through the
hole in the middle of the valve seating, as shown in figures
•
When mounting the splash guard: Note that the opening of the splash guard should
face downwards
.
6.1
•
For mounting the oxygen reservoir bag on to Ambu Mark IV Baby, attach the adaptor
to the resuscitator inlet valve by mounting the adaptor corrugated connector onto
the inlet connector, and additionally covering the oxygen inlet connector with the
adaptor cap. Subsequently the oxygen reservoir bag can be connected to the adaptor
corrugated connector.
Perform a functionality test after reassembly and before it is prepared for immediate use in
emergency situations.
Service
The resuscitator requires no scheduled maintenance other than regular reprocessing,
inspection and testing.
4.5. Disposal
Used products must be disposed of according to local procedures.
5. Technical product specifications
5.1. Standards applied
The Ambu Mark IV is conforming with the product specific standard EN ISO 10651-4.
5.2. Specifications
6
.
Resuscitator volume
Delivered volume one hand
Delivered volume two hands
.
6.3
Dimensions (length x diameter)
Weight without Reservoir
and mask
Pressure-limiting valve
Dead space
Oxygen reservoir bag volume
Mark IV Baby
420 ml
****
,
300 ml
*
****
,
-
*
****
****
265 x 80 mm
190 g
****
40 cmH₂O
**
≤ 5 ml + 10 %
of the delivered volume
1500 ml (bag)
****
100 ml (tube)
Mark IV Adult
1450 ml
600 ml
900 ml
270 x 130 mm
415 g
-
≤ 5 ml + 10 %
of the delivered volume
1500 ml
13
Publicidad
