Stihl TS 700 Cutquik Manual De Instrucciones página 38

3
2
3
1
Replacing the air filter
Only if there is a noticeable loss of
engine power
: Remove the locking screw (1) on
the filter cover.
: Remove the filter cover (2).
: Remove all coarse dirt from the area
around the filter and the inside of the
filter cover.
: Remove the screws (3).
: Remove the filter housing (4).
: Pull the main filter (5) out of the filter
housing.
TS 700, TS 800
5
4
3
3
Set choke lever to g
:
: Pull the auxiliary filter (6) off the filter
base. Ensure that dirt does not
enter the intake area.
: Clean the filter area.
: Fit a new main filter and new
auxiliary filter together with all the
other filter components.
: Refit the filter cover.
: Tighten down the locking screw.
Only use original STIHL air filters.
The high quality of these parts will
6
ensure troublefree operation, a long
service life for the power unit and
extremely long filter life.
English / USA
37