Pit Boss PRO Serie Montaje Y Operación página 11

IMPORTANT: If the Flame Broiler™ Main Plate is on the base of the
barrel, it is installed incorrectly. The Flame Broiler™ Main Plate
should sit at an angle, with the left side sitting higher than the right.
Poor installation of this part may result in damage to your Main Grill
barrel.
• Place the Flame Broiler™ Slider on top of the Flame Broiler™ Main
Plate, covering the slotted openings. Ensure the raised tab is on the
left, to easily adjust for direct or indirect flame when cooking. Note
illustration 10B. Both Flame Broiler™ parts are lightly coated with oil
to avoid rusting when shipped.
• Next, remove the Flame Broiler™ Adjusting Bar Handle from the Flame
Broiler™ Adjusting Bar. Insert the Flame Broiler™ Adjusting Bar through
the opening hole on the left side of the Main Barrel. Add the Flame
Broiler™ Adjusting Bar Handle back onto the end outside the barrel.
Next, slide the notched end of the Adjusting Bar into the locking tab
on the Flame Broiler™ Slider, giving you adjustable access to the Flame
Broiler™ Slider on the main plate. Note steps in 10C and 10D.
NOTE: When the Flame Broiler™ Slider is open and direct flame is
used, do not leave the grill unattended for any period of time.
11. INSTALLING THE COOKING COMPONENTS
Parts Required:
1 x Top Cooking Rack (#1)
1 x Middle Cooking Rack (#2)
1 x Cooking Grate (#3)
Installation:
• Place the Cooking Grate on the lower ledges inside of the Main Barrel.
Next, place the Middle Cooking Rack on the middle ledges inside the
Main Barrel. Lastly, place the Top Cooking Rack on the top ledges inside
of the Main Barrel.
NOTE: To maintain the searing and grilling performance of your
Cooking Grates, regular care and maintenance is required.
Insert the flame broiler adjusting bar Insert the flame broiler adjusting bar
through the opening hole on the left through the opening hole on the left
side of the main barrel. Add the flame side of the main barrel. Add the flame
10B
4
10C
11
10
10D
11
5
11
1
2
3
11