Pit Boss PRO Serie Montaje Y Operación página 19

USING THE PROGRAMMABLE MEAT PROBES
•
A meat probes measures the internal temperature of the meat on the grill, similar to your indoor oven. Insert the stainless-
steel meat probe into the thickest portion of the meat. The internal temperature of the meat is shown on the display screen.
Plug-in the Meat Probe adapter to the meat probe connection port and ensure it is inserted all the way into the plug. You
will feel and hear it snap in place.
IMPORTANT: When placing the meat probe into your meat, ensure the meat probe and meat probe wires avoid
direct contact with flame or excess heat. This can result in damage to your meat probe. Run the excess wire out the
rear exhaust holes of the Main Barrel, the top of the Main Barrel (near the grill lid hinge), or through the front hole
near the hopper. When not in use, disconnect from the meat probe connection port, and place in the holes on the
hopper handle to keep protected and clean.
SETTING/PROGRAMMING A MEAT PROBE SET TEMPERATURE
To program the desired Set temperature of the a Meat Probe, follow the steps below:
1. Plug-in the adapter end of a meat probe into a connection port on the Controller.
2. Move the Controller Knob over the Meat Probes and press the Controller Knob up or down to access the
Probes sub-screen. You can also rotate the Controller Knob and press to select at this state or continue.
3. Choose a desired cooking temperature by selecting a protein presets, or rotate the Controller Knob
to directly select the desired Set temperature. The temperature readout will blink blue while being
modified.
4. Once the desired Set temperature of your selected Meat Probe is reached, press the Controller Knob to
confirm.
IMPORTANT: P1 is a programmable meat probe with Controller control. Not only will it cook the
meat to your desired temperature, but once P1 reaches the Set temperature, a beep will sound
and a bell icon will appear. The grill will reduce temperature to low (65°C / 150°F) automatically
to keep food warm until ready to serve.
P2 is programmable meat probe as well. Once P2 reaches the Set temperature, a beep will sound
and a bell icon will appear.
CONNECTING TO THE PIT BOSS® APP
Follow these instructions on how to connect your grill to the Pit Boss® app with your Android™ or iOS® device. The app will allow
you to control and monitor your grill and meat probe temperatures from your mobile device. Enjoy the benefits that Pit Boss®
mobile connectivity has to offer!
1. Download the Pit Boss® app. Open the app and allow Bluetooth® to be enabled for setup. New users will need to create
an account and follow the prompts to login.
2. If you are within Bluetooth® range (9 m / 30 ft), the Pit Boss® app will automatically detect your grill. Select your grill
model. If you do not see your grill on the screen, ensure your unit is connected to a power source and is turned on.
3. Name your grill model (ie. My Smoker) in the app and select "Connect" at the bottom of the screen. This will save your
grill model in the devices menu.
4. From the devices menu, click the grill model to connect. This will show you the controller screen.
5. Click the settings option (gear) in the top-right corner, enter your Wi-Fi credentials, then click the check mark at the
bottom of the screen to connect. Now both Bluetooth® and Wi-Fi (cloud) icons will show on the devices menu, showing
that the grill is connected.
19