Pit Boss PRO Serie Montaje Y Operación página 12

12. MOUNTING THE RACK HANGER
Parts Required:
1 x Rack Hanger (#6)
Installation:
• Secure the Rack Hanger to the back panel of the Main Barrel using
the pre-assembly two screws. Cooking Racks can be hung on the Rack
Hanger while not in use.
13. PLACING THE GREASE BUCKET
Parts Required:
1 x Grease Bucket (#19)
Installation:
• Place the Grease bucket on the spout hook on the end of the Main
Barrel. Ensure it is level to avoid grease spills.
• The unit is now completely assembled.
14. CONNECTING TO A POWER SOURCE
• STANDARD OUTLET
This appliance requires 110-120V and 60Hz. It must be a 3-prong
grounded plug. Ensure grounded end is not broken off before use.
• ON THE ROAD
A Pit Boss® unit can operate using a 12 volt, 100 watt inverter plugged
into your automobile outlet.
IMPORTANT: Disconnect unit from power source when not in use.
12
12
6
13
19
14