Publicidad
Idiomas disponibles
Idiomas disponibles
REMOVING THE BLADES
WARNING:
the cutting edges with rags or other materials when performing any maintenance on
the mower blades. Always remove the battery pack when servicing or transporting the
mower.
NOTICE:
The following tools (not included) are required for replacement of the blades:
◾
9/16" (14 mm) or adjustable wrench (impact wrench with 9/16" socket is
recommended);
◾
11/16" (17 mm) or adjustable wrench (impact wrench with 11/16" socket is
recommended).
◾
Torque wrench with 9/16" (14mm) and 11/16" (17mm) sockets;
◾
Manual screwdriver or metal rod with a diameter of 5/16" (8 mm).
◾
Manual screwdriver or metal rod with a diameter of 1/4" (6.35 mm).
1. Stop the motor; remove the battery
pack from the mower.
2. Turn the mower on its side.
3. Wear protective gloves. Insert a
manual screwdriver or metal rod,
Ø5/16" (8 mm) or slightly less in the
stabilizer hole. This will prevent the
blades from rotating while loosening
the bolt/nuts (Fig. 1).
4. Use a 11/16" (17mm) wrench to
loosen and remove the two 11/16"
"Blade Set" nuts (Fig. 2). SAVE THE
TWO NUTS FOR LATER BLADES
REASSEMBLY.
22
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2160SP/LM2160SP-FC
Always protect your hands by wearing heavy gloves or wrapping
1
2
Stabilizer
"Blade Set" Nut
Publicidad
