Ego Power+ LM2160SP Manual Del Operador página 50

LUBRICATION
Lubricate with light oil as directed below
at least once each season.
◾
Periodically lubricate the spring and
pivot pin in the quick-adjust lever,
the torsion spring and pivot of the
rear-discharge door with light oil to
prevent rust (Fig. 36a & 36b).
◾
Place the mower into the locked
storage position:
1. Move the cutting-height-adjustment
lever toward the front and engage it
in the lowest setting (setting 1).
2. Open the handle-locking clamp
and fully recess the side rails to the
compact position.
3. Press and hold the quick-adjust
lever with your right hand to release
the handle.
4. Gently pivot the handle toward the
front of the mower; release the
quick-adjust lever and continue
to pivot the handle until you hear
and feel the lock pin engage in the
locked storage position.
◾
Place the folded mower upright on
the ground (Fig. 36c).
◾
Lubricate the deck-height adjustment joint.
◾
lubricate the bearings on the drive shaft near the rear wheels and the bearings in
the front wheels
(Fig. 36c).
50
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2160SP/LM2160SP-FC
36a
Spring
Pivot Pin
36b
Pivot
36c
Bearing
Drive shaft
Bearing
Torsion Spring
Bearing
Deck-Height
Adjustment Joint
Bearing