Publicidad
Idiomas disponibles
Idiomas disponibles
REPLACING THE WHEELS
(Fig. 37a, 37b & 37c)
WARNING:
the battery pack when servicing or
transporting the mower.
1. Turn the mower on its side with the
upper surface against a wall.
2. Use a flat-blade screwdriver to pry
the dust cover away from the wheel.
3. Use an adjustable or 1/2"
(13mm) wrench to turn the bolt
COUNTERCLOCKWISE to loosen it.
4. Remove the bolt, the worn wheel,
and the wave washer from the
wheel axle.
5. Remove the drive gear from the
worn wheel and assemble it to the
new wheel with the 3 screws.
NOTE:
When mounting the drive gear,
the surface of the gear stating "OUT"
should face toward the outside
(Fig. 37c).
6. Mount the wave washer and the
new wheel on the wheel axle. Note
that the round recess must face
outward.
7. Lock the wheel with the bolt by tightening the bolt clockwise.
8. Mount the dust cover onto the wheel and press it in place.
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2160SP/LM2160SP-FC
Always remove
37a
37b
Rear Wheel
Drive Gear
Wave Washer
37c
Dust Cover
Bolt
Round Recess
facing outside
Front Wheel
Wave Washer
Wheel Axle
Dust Cover
Bolt
Round Recess
facing outside
Screw
Wheel Axle
51
Publicidad
