Ego Power+ LM2160SP Manual Del Operador página 28

3. UPPER OPERATING POSITION: Lift the handle with one hand. Gently pivot the
handle backward until you hear and feel the lock pin engage in the Upper
Operating Position. Fully extend the side rails and securely close the handle-
locking clamp (Fig. 18). Taller users may prefer this position.
4. MIDDLE OPERATING POSITION: Press and hold the quick-adjust lever with one
hand to release the handle from the upper operating position. Begin to lower the
handle with your other hand, and then release the lever. Gently pivot the handle
downward until you hear and feel the lock pin engage in the Middle Operating
Position. Fully extend the side rails and securely close the handle-locking clamps
(Fig. 18).
5. LOWER OPERATING POSITION: Press and hold the quick-adjust lever with one
hand to release the handle from the middle operating position. Begin to lower the
handle with your other hand, and then release the lever. Gently pivot the handle
downward until you hear and feel the lock pin engage in the Lower Operating
Position. Fully extend the side rails and securely close the handle-locking clamp
(Fig. 18).
NOTE:
The motor and self-propel system cannot be started unless:
a) The side rails are fully extended.
b) The green handle-locking clamp is securely closed.
c) The handle is locked into one of the three operating positions.
The handle error icon
the handle in one of the operating positions.
18
28
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2160SP/LM2160SP-FC
will light up on the LCD screen as a reminder to properly set
A
B
Indicator Line
C