Ego Power+ LM2160SP Manual Del Operador página 25

4. Install the washer and shaft bolt
onto the motor shaft and turn the
shaft bolt CLOCKWISE by hand to
pre-tighten it (Fig. 10).
5. Install the "Blade Set" nuts into the
"Blade Set" bolts and turn them
CLOCKWISE by hand to pre-tighten
them (Fig. 11).
6. Insert a manual screwdriver or
metal rod Ø5/16" (8 mm) or slightly
less in the stabilizer hole. This will
prevent the blades from rotating
while tightening the bolt/nuts
(Fig. 12).
7. Use a 9/16" (14 mm) torque wrench
to tighten the shaft bolt CLOCKWISE.
The recommended torque for the
blade bolt is 36-43 ft-lb (49-59 Nm).
8. Use a 11/16" (17 mm) torque
wrench to tighten the "Blade
Set" nuts CLOCKWISE. The
recommended torque for the blade
bolt is 22 ft-lb (30 Nm).
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2160SP/LM2160SP-FC
10
Washer
Shaft Bolt
11
"Blade Set" Nuts
12
25