Ego Power+ LM2160SP Manual Del Operador página 31

ATTACHING/REMOVING THE
SIDE-DISCHARGE CHUTE
(Fig. 21 & 22)
WARNING:
make any adjustment to the lawn mower
without first stopping the motor, removing
the battery pack and waiting until the
blade has stopped rotating.
1. Remove the battery.
2. Lift the rear-discharge door.
3. Align the lower edge of the side-
discharge chute with the groove of
the doorsill and insert it into the slot.
4. Push the top of the side-discharge
chute and insert it into the mower.
Check to see that it is securely
seated in the deck.
5. To remove the side-discharge chute,
lift the rear-discharge door, grasp the side-discharge chute and pull it out.
6. Release the discharge door and make sure that it rests firmly against the side-
discharge chute.
NOTICE:
The side-discharge chute must be removed in order to install and use the
grass bag or mulching insert.
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2160SP/LM2160SP-FC
Do not at any time
21
22
B
A
Rear Discharge
Door
Groove
Side-discharge
Chute
31