OPERATION
TO ATTACH/DETACH THE
BATTERY PACK (Fig. 25)
Charge the battery pack before first
use.
WARNING:
or missing, do not attempt to attach the
battery pack to the mower or operate the mower until the broken or missing parts are
replaced. Failure to do so could result in serious injury.
1. The battery cover is hinged. Raise the battery cover by lifting the rear the cover.
2. Align the grooves in the battery pack, with the raised ribs in the battery
compartment, and then insert the battery pack into the compartment.
3. Push the battery pack until you hear a "click". The battery-release button will
spring up when the battery pack is securely attached.
NOTICE:
Make sure that the latch on the mower snaps into place and that the battery
pack is secured to the mower before starting operation.
4. To detach the battery pack, depress the battery-release button to release the
battery pack, and then lift it out of the compartment.
5. Close the battery cover.
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2160SP/LM2160SP-FC
If any parts are broken
25
A
B
Battery-release
Button
Battery Cover
33