GASPARDO PINTA Empleo Y Mantenimiento página 31

ENGLISH
USE AND MAINTENANCE
1.5 HANDLING
If the machine is handled, it must be lifted by hooking onto the
appropriate holes (A) (Fig. 2) with a suitable winch or crane of
sufficient capacity. Because of the danger involved, this operation
should be carried out by trained and responsible personnel.
The mass of the machine is on the identification Plate (Fig. 1).
Stretch the rope to keep the machine level.
The hook points can be detected by finding the «hook» symbol (9
Fig. 4).
A
fig. 2
g
cod. G19502491 31