BONFIGLIOLI Vectron ANG210 Manual Del Usuario página 78

• Do not touch terminals before capacitors have discharged. Do not touch
the heat sink during operation as there is a risk of skin burn due to high
temperature.
• Do not remove covers during operation.
• Please note, that Bonfiglioli does not assume any responsibility for the
compatibility of external products (e.g. motors, cables, filters, etc.). Use
the device in combination with external products at your own risk.
• Do not touch electronic components or contacts.
• Do not operate damaged or destroyed components.
• Repairs may be carried out by the manufacturer or persons who are au-
thorized by the manufacturer only.
• Repairs must be carried out by qualified electrotechnical experts.
• Do not modify the unit in any way not explained in this documentation.
GB
• Do not connect an inappropriate voltage supply.
• Keep the manual accessible to the operators.
For more information about the range of functions of the device and
about operation, maintenance and storage, refer to the applicable
operating instructions document.
1.2 Designated use
The product is an electrical drive component. It is applicable for
• installation in machines or electrical plants
• industrial environments
The frequency inverters are electrical drive components intended for installa-
tion in industrial plants or machines. Commissioning and start of operation is
not allowed until verified that the machine meets the requirements of the EC
Machinery Directive 2006/42/EC and DIN EN 60204-1.
The frequency inverters meet the requirements of the low voltage directive
2014/35/EU and DIN EN 61800-5-1. CE-labelling is based on these standards.
Responsibility for compliance with the EMC Directive 2014/30/EU lies with the
operator. Frequency inverters are only available at specialized dealers and
intended exclusively for commercial use as per EN 61000-3-2.
No capacitive loads may connect to the frequency inverter.
•
1.3 Transport and storage
• Store product in its original package in dust-free room.
Avoid strong temperature fluctuations.
•
After one year of storage, connect the device to mains voltage for 60
•
minutes.
78
Quick Start Guide ANG
07/20