Control Of The Installation; Cleaning - Metcalfe TR 70 Manual De Instrucciones Para Uso Y Manutención

After mating the plug to the mains socket,
the machine is ready for use.
First, however, check out proper operation
of all moving parts and components of the
machine.

5.1 CONTROL OF THE INSTALLATION

NOTE: Every drive is voluntarily run by
the start button, when the bowl
cover is closed (Fig. 12
Verify that:
• In the "0" position (Fig. 11
ments of the machine have to stop; for
model TR 75/E, in the "drawplate position"
(Fig. 11 ) the mixer rotates in a clockwise
D
direction and the Archimedean screw must
rotate in the same direction (check through
the slots in the lid); for model TR 70, on the
other hand, in the "drawplate position"
(Fig. 11 ) the mixer rotates in a counter-
D
clockwise direction and the Archimedean
screw must rotate in the opposite direction;
in the "knead" position (Fig. 11
parts must rotate in the opposite direction.
If the machine or some of its parts fail,
call your local authorised dealer or
concessionaire for repairs.

6. CLEANING

Warning: For healthy and
hygienic processing of nutritio-
nal products, be sure to keep
your machine and the surroun-
ding environment clean.
DANGER: Always cut off power sup-
ply before cleaning.
You have to properly clean all the elements
which are in contact with the product; pro-
tection cover, pool, mixer, Archimedean
screw, drawplate, ring nut, when the pro-
duct is still soft.
Fig. 9
).
F
) all the ele-
C
Fig. 10
) the
A
A
Fig. 11 - TR 75/E Panel
Fig. 12
25
A
70÷80
cm
D
B
C
F
50
cm
70÷80
cm
E
G