Publicidad
Idiomas disponibles
Idiomas disponibles
- oven operation must be cancelled and restarted from the beginning to set
a different "DELAY" value. "DELAY" cannot be set for more than 12 hours in
advance.
Directions:
1.
Select oven baking mode by pressing the appropriate button (i.e. "BAKE,"
"CONV BAKE," etc.)
2.
Press the "DELAY" button.
3.
Clock will begin to flash, indicating that a time of day to start the oven must
be entered. Enter the time of day when the oven is to begin operation and
press the"START/ENTER" button or click the Control Input Knob (if present).
4.
Place food in the oven.
5.
Display will alternate between the current time of day and the time when the
oven will turn on. Also, the words "DELAY START" will be shown above the
clock in the control display when this mode is active.
6.
When the start time is reached, a signal will alert user that oven is starting.
Upon starting, the display will convert to show the normal information for
the bake mode selected.
Cook Time (some models):
Designed to allow user to end oven operation after a specified time. Works
only with "BAKE," "KEEP WARM," "CONV BAKE," or "CONV ROAST." Once a
"COOK TIME" has been set, it cannot be modified - baking mode must be
cancelled and restarted from the beginning to set a different "COOK TIME."
Duration cannot be set for longer than 12 hours. Can be used in conjunction
with "DELAY" feature - set "DELAY" feature first (see above), and then set
"COOK TIME."
Directions:
1.
Start oven operation normally as described above.
2.
Press the "COOK TIME" button.
3.
Clock will display "00:00" indicating that a time duration must be entered.
Enter time in hours and minutes (hh:mm) and press the "START/ENTER"
button or click the Control Input Knob (if present).
4.
Clock will begin to count down. When "00:00" is reached, the display will
flash and sound an alert to indicate the bake mode has ended. Oven will
either turn off or revert to "KEEP WARM" mode, depending on the settings.
(See Control Settings section of this manual for instructions on changing
settings.)
5.
Press "CLEAR/OFF" to clear the signal or to exit the timed bake early.
35
Publicidad
