Midea MGS30S2AST Manual Del Usuario página 37

3.Select the baking mode ("BAKE," "CONV BAKE," or "CONV ROAST"),
select oven temperature, and press the "START/ENTER" button or click
the Control Input Knob (if present).
4.Once oven temperature has been set, the blue text and probe icon will
flash, indicating that the desired food temperature is to be set next. Adjust
food temperature to the desired value and press the "START/ENTER"
button or click the Control Input Knob (if present).
5.While the probe mode is in operation, the display will alternate between
the oven set temperature and the probe temperature reading.
6. Once the oven probe reaches the desired temperature, the display will
flash and sound an alert to indicate the bake mode has ended. Oven will
either turn off or revert to "KEEP WARM" mode, depending on the settings.
(See Control Settings section of this manual for instructions on changing
settings.)
7. Press "CLEAR/OFF" to clear the signal or to exit the probe bake mode early.
Modifying the probe temperature:
1. On Control Input Knob models with a separate "PROBE" key on the oven
control, pressing this key allows user to change the desired food
temperature at which the bake cycle will end.
2.On Numeric Keypad Input models, the desired food temperature cannot
be modified. The bake mode must be ended by pressing the "CLEAR/OFF"
key and re-entering the bake mode and desired food temperature as
described above.
37