Cameo F2 FC IP Manual De Usuario página 16

STANDALONE OPERATING MODE DIRECT LED (RGBW colour mixing)
Starting from the main display, press the left-hand rotary-push encoder to access the menu for
selecting the operating mode. Turn the left encoder (SELECT) to select the Direct LED mode (note
the selection arrow on the left) and confirm by pressing the left encoder (ENTER). Now set the
total brightness (DIM) and the intensity of R, G, B and W using the three rotary-push encoders (see
illustration).
currently activated operating mode
Turn encoder =
Set overall brightness (DIM)
Press encoder =
Selection of the operating mode
(Mode)
STANDALONE OPERATING MODE GEL (colour filter presets)
Starting from the main display, press the left-hand rotary-push encoder to access the menu
for selecting the operating mode. Turn the left encoder (SELECT) to select the GEL mode (note
the selection arrow on the left) and confirm by pressing the left encoder (ENTER). Now set the
brightness (DIM) and colour filter preset (gel) using the left and middle rotary-push encoders (see
illustration). For the colour filter presets with Lee filter names, please refer to the DMX tables
under DMX CONTROL (channel 8 colour presets in 10-channel DMX mode, without User Colors).
currently activated operating mode
Turn encoder =
Set overall brightness (DIM)
Press encoder =
Selection of the operating mode
(Mode)
16
Turn encoder =
Set brightness of R or B
Press encoder =
switch between R+G and B+W (colour)
Turn encoder =
Select filter preset
Fan mode
Turn encoder
Set brightness of G or W
Press encoder =
Open main menu (Menu)
Fan mode
Press encoder =
Open main menu (Menu)