Cameo F2 FC IP Manual De Usuario página 24

SETUP AND INSTALLATION
HAZARD: Overhead mounting requires extensive experience, including the calculation of
the load limit values of the installation material and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.
Thanks to its four plastic feet, the spotlight can be positioned in a suitable location on a level sur-
face. Mounting to a traverse is possible with the pre-installed mounting bracket (A) and a suitable
traverse clamp (optional). Ensure firm connections and secure the spotlight by attaching a suitable
safety cable to the point intended for this purpose on top of the housing (B). Use the lever screw
(C) on one side to adjust the direction of radiation on a vertical plane.
A
C
24
B