The front lens (G) is in a rubber frame and the glass lens (H) is located behind it. These can be
cleaned by folding the bracket upwards (as previously described) and lifting the front lens (with
the rubber frame) out of the angle brackets. Clean the front lens and the glass lens located behind
it with a moist, lint-free cloth, making sure not to scratch the surface of the lenses. Now place
the front lens in front of the glass lens and fold the bracket back downward until the locking pin
engages.
CAUTION: For safety reasons, the filter frame must always be in the respective bracket
on the spotlight, even if no filter is inserted!
26
H
- Illustrations similar -
G