Cameo F2 FC IP Manual De Usuario página 17

STANDALONE OPERATING MODE USER COLOR (Individual colour presets 1–8)
Starting from the main display, press the left-hand rotary-push encoder to access the menu for
selecting the operating mode. Turn the left encoder (SELECT) to select the User Color mode (note
the selection arrow on the left) and confirm by pressing the left encoder (ENTER). Select one of
the 8 pre-programmed, but individually editable colour presets by turning the left encoder again.
Confirm the selection by pressing the left encoder (ENTER). Now set the brightness (DIM) of the
colour preset using the left encoder (see illustration). Individual preset settings and renaming of
presets can be done in the menu item Edit User Color.
currently activated operating mode
Turn encoder =
Set brightness (DIM)
Press encoder =
Selection of the operating mode
(Mode)
EDIT STANDALONE OPERATING MODE USER COLOR (Edit User Colour)
Starting from the main display, press the rotary-push encoder to enter the main menu. Turn the
left encoder (SELECT) to select the menu item Edit User Color (note the selection arrow on the
left) and confirm by pressing the left encoder (ENTER). Now you can select one of the 8 colour
presets by turning the left encoder and confirm the selection by pressing the left encoder (ENTER).
Now give the preset an individual, up to 12-digit name (Edit User Colour Name) by turning the left
encoder to select a letter, the underscore or a number for the first digit of the preset name and
confirm by pressing the left encoder. This is followed by the input for the second digit and so on.
When the preset name is complete, press the middle encoder (Save&Next) to move to the next
editing step. If you press Save&Next before selecting a letter, an underscore, or a number for the
first digit, the previous preset name is retained and you move immediately to the next editing step.
Turn encoder =
Select filter preset
Fan mode
Press encoder =
Open main menu (Menu)
17