Sony KL-X9200J Manual De Instrucciones página 25

Select ing t he color
syst em
Normally, set COLOR SYSTEM to AUTO. The
appropriate color system will be automatically selected
for the input video signal. If the input signal is too
weak and the picture is distorted or colorless, select the
color system manually.
1
Press M ENU.
2
Press v or V t o select "
press ENTER.
3
Press v or V t o select COLOR SYSTEM , and
press ENTER.
Downloaded from: https://www.usersmanualguide.com/
(COLOR SYSTEM )
MENU ENTER
MENU
(OPTION)," and
ENTER
O P T I O N
AUTO SHUT OFF:
LANGUAGE:
ENTER
COLOR SYSTEM:
4
Press v or V t o select an appropriat e color
syst em , NTSC3.58, NTSC4.43, PAL, PAL M or
SECAM , and press ENTER.
5
Press M ENU t o ret urn t o t he original screen.
Not es
• You can operate the menu using the √/◊/ı/∫ and the ENTER
buttons inside the drop-down panel on the front of the
monitor.
• You cannot use this function for the input from RGB 1, 2 IN
and COMPONENT IN.
OFF
ENGLISH
AUTO
NTSC3.58
NTSC4.43
PAL
PAL M
SECAM
EXIT
ENTER
GB
25
Operat ions -GB