Descargar Imprimir esta página

Sony KL-X9200J Manual De Instrucciones página 27

Ocultar thumbs Ver también para KL-X9200J:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Addit ional Inf ormat ion
Cleaning t he air
f ilt er
After about 300-hours of use, the message, "CLEAN
THE FILTER," will appear on the screen. In this case,
clean the air filter. When it becomes difficult to remove
the dust, replace the filter with a new one. To clean the
filter, follow the steps below.
1
Turn of f t he pow er sw it ch on t he m onit or
and unplug t he pow er cord.
2
Rem ove t he f ront panel f rom t he m onit or.
Hold the monitor tightly.
Grasping the left end of the front panel
w ith your fingers, pull the panel tow ards
you. Repeat this step w ith the right end of
the panel. Be careful not to catch your
fingernails.
3
Pull t he air f ilt er upw ards t o rem ove.
Downloaded from:
https://www.usersmanualguide.com/
4
Rem ove t he dust f rom t he f ilt er w it h a
vacuum cleaner.
Vacuum cleaner
5
At t ach a new f ilt er t o t he m onit or.
Fit the four projections to the monitor securely.
6
M ount t he f ront panel.
Be careful not to damage the speakers.
Not es
• Clean the air filter when the message, "CLEAN THE FILTER,"
appears on the screen. If you do not, internal heat may build
up.
• Do not use a torn filter. Fit the four projections on the filter to
the monitor securely. Dust inside the monitor may cause
picture distortion and fire.
• Be sure to attach the air filter securely; otherwise, the monitor
will not turn on.
• Contact your Sony dealer for a new filter.
Addit ional Inf orm at ion
GB
27
-GB

Publicidad

loading

Este manual también es adecuado para:

Kl-x9200mKl-x9200u