Klarstein AMAZONIA 6 SMART Manual De Instrucciones página 54

EN
54
Fill in rinse aid
1
Remove the lid of the rinse aid
dispenser by turning it anticlockwise.
3
Close the rinse aid holder lid by
turning it clockwise.
Set the rinse aid quantity
Carefully fill the rinse aid into the
dispenser. Make sure that it does not
overflow.
Note: Wipe up spilled rinse aid
with an absorbent cloth to avoid
excessive foaming during the next
wash cycle.
Remove the lid of the rinse aid dispenser. Turn the
rinse aid indicator to a number. The higher the
number, the more rinse aid the dishwasher uses.
If the dishes do not dry properly or are stained, turn
the knob to the next higher number until your dishes
are stain-free. Set the knob to a lower number if
sticky whitish stains form on the dishes or a bluish
film on glassware or cutlery.
2