Publicidad
Idiomas disponibles
Idiomas disponibles
Britax Child Safety, Inc.
Overhang from Vehicle Seat
Overhang (including side overhang) is not allowed. The base of the child
restraint must fit completely flat on the vehicle seat.
Lower Connectors
The lower connectors are located in the back of the base. Store the lower connectors in the slots
when not in use.
Removing and Replacing Lower Connectors from Storage Slots
• To remove, press the lower anchor release button on the child's
left side of the booster base, then pull each of the connectors
from the storage slots.
18
Table of Contents
• To replace, press the lower connector adjuster button on the
child's left side of the booster base and then pull the lower
connector adjuster strap until the connectors retract into the
base. Ensure the straps are not twisted.
NOTE: The lower connectors may need to be rotated so they
retract into the slots with the bottom side facing down.
Attaching and Removing Lower Connectors from Vehicle Lower Anchors
• To attach, remove the lower connectors from the storage slots
and firmly push down onto the vehicle lower anchors until a
click is heard.
• To remove, push the lower connector release button on the
child's left side of the booster seat to loosen connector strap
(see page 18). Then press and hold the red lower connector
release buttons and pull the connectors from the vehicle
lower anchors.
Table of Contents
HIGHPOINT User Guide
19
Publicidad
