Publicidad
Idiomas disponibles
Idiomas disponibles
Britax Child Safety, Inc.
4. Attach the lower connectors.
a. Verify the lower anchor adjuster straps are not twisted.
b. Using the lower anchor farthest from you for easiest
positioning push the lower connectors onto their adjacent
lower anchors as shown.
NOTE: You may need to turn the back of the booster seat
towards you for easier access to the lower anchors.
c. A click helps confirm lower connectors are attached. Pull on
lower connectors to confirm a secure attachment.
IMPORTANT:
If a click is not heard when connecting the lower
connectors, the lower anchor adjuster strap may be twisted or there
may be debris in the lower connector. Correct either situation before
continuing with the positioning process.
5. Guide the booster seat into place while pulling the lower
connector adjuster strap to remove slack.
NOTE: Only tighten until the slack is removed from the lower
connector adjuster strap. Over-tightening the strap can force
the backrest of the booster seat forward.
22
Table of Contents
Table of Contents
Securing Your Child
Warning! Use only the vehicle's lap and shoulder belt system when restraining the child
in this booster seat.
Booster Seat with Backrest
1. Sit your child in the booster seat, ensuring that the child is sitting
upright and that their back is against the backrest. Check the
head restraint for proper height adjustment. The top of the head
restraint should be above the child's ears (see page 8).
2. Pull the vehicle seat belt out and route the shoulder part of the
vehicle seat belt through the shoulder belt guide.
Table of Contents
HIGHPOINT User Guide
23
Publicidad
