Publicidad
Idiomas disponibles
Idiomas disponibles
2
Accessory Parts
Part name
Q'ty
Owner's Manual
1
Installation Manual
1
Warranty
1
Edge Guard
1
Protection busing
1
EN-5
Shape
Usage
—
(Be sure to present it to the customers.)
—
This manual for installer.
—
(Be sure to present it to the customers.)
Protects piping against sharp edges
Protects communication wires
– 3 –
3
Installation of R410A Air Conditioner
This air conditioner adopts the HFC refrigerant (R410A) which does not deplete the ozone layer.
• To prevent mixing of refrigerant or refrigerating oil, the size of the main unit's charge port or installation tool's
connecting section differs to that of an air conditioner for the former refrigerant.
Accordingly, exclusive tools are required for the refrigerant (R410A) as shown in the following table.
• For connecting pipes, use new and clean piping materials so that water or dust does not enter.
Required Tools and Cautions on handling
Prepare the tools and equipment listed in the following table before starting the installation work.
: R410A exclusive
: Generic
Tools/equipment
Manifold gauge*
Vacuuming/charging
refrigerant and operation check
Charging hose
Gas leak detector
Gas leak check
Vacuum pump with backflow
Vacuum drying
prevention function
Flare tool
Flare machining of pipes
Bender
Bending pipes
Refrigerant recovery
Refrigerant recovery
equipment
Torque wrench
Tightening flare nuts
Pipe cutter
Cutting pipes
Brazing torch and nitrogen
Braze pipes
cylinder
Refrigerant charging scales
Charging refrigerant
4 mm hexagon wrench
Opening liquid valve
Use
Note
Usable if dimensions are adjusted.
Ø1/2" (12.7 mm) and Ø5/8" (15.9 mm)
EN-6
Publicidad
