Publicidad
Idiomas disponibles
Idiomas disponibles
Touch fields
Touch fields are touch-sensitive surfaces. To select a function, touch the relevant field.
Symbol
Rotary selector
You can use the rotary selector to change the adjust-
ment values shown on the display.
For most selection lists, e.g. programmes, the first
point begins again following the last point. For some
selection lists, e.g. cooking time, rotate the rotary se-
lector back again once the minimum or maximum
value has been reached.
Display
The display shows the current settings, options or rel-
evant information.
Status bar
The status bar is located at the top of the display.
The status bar displays the time, timer duration and
programme duration.
Progress line
The progress line displays how much of the cooking
time, for example, has already elapsed.
The straight line below the adjustment values is filled
from left to right as the operation progresses.
Operating modes
The menu is divided into different operating modes.
Symbol
Use
Microwave
Select microwave outputs
Grill
Select the grill setting or grill setting
with microwave output
Programmes
Automatic programmes
Easily prepare selected meals
Settings
Settings
Individually adjust the appliance set-
tings
4.2 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Interior lighting
When you open the appliance door, the interior lighting
switches on. If the appliance door remains open for
longer than approx. 5 minutes, the interior lighting
switches off again.
Touch field
Left
Right
With most types of heating and functions, the interior
lighting remains on while the appliance is in operation.
The interior lighting switches off again when the opera-
tion stops.
Cooling fan
The cooling fan switches on and off as required. The
hot air escapes through the ventilation slots above the
appliance door.
ATTENTION!
Covering the ventilation slots will cause the appliance
to overheat.
▶
To cool the cooking compartment more quickly after
operation, the cooling fan continues to run for a certain
period afterwards. If the appliance is running in mi-
crowave operation, the appliance remains cool, but the
cooling fan still switches on. The cooling fan may con-
tinue to run even when microwave operation has
ended.
Condensation
Condensation can occur in the cooking compartment
and on the appliance door when cooking. Condensa-
tion is normal and does not adversely affect appliance
operation. Wipe away the condensation after cooking.
Automatic door opener
If you press the automatic door-opener, the appliance
door springs open. You can fully open the appliance
door manually.
Notes
¡ In the event of a power failure, the automatic door-
¡ If you open the appliance door during operation,
¡ When you close the appliance door, the operation
¡ If the appliance is switched off for an extended
Familiarising yourself with your appliance en
Use
Navigate to the left on the display
Navigate to the right on the display
Do not cover the ventilation slots.
opening does not work. You can open the door
manually.
this pauses the operation.
does not continue automatically. Start the operation.
period of time, the appliance door opens with a time
delay.
39
Publicidad
