Publicidad
Idiomas disponibles
Idiomas disponibles
en Basic settings
If an operating mode is running, you can use
lect the timer. The timer duration is highlighted for a
short time. You can change the timer duration.
13 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
13.1 Changing basic settings
1.
Press
.
2.
Press
.
a The operating modes menu opens.
3.
Use the rotary selector to select "Settings".
4.
Press .
5.
Use the rotary selector to change the values.
6.
Always use to switch to the next settings and, if re-
quired, to make any changes.
7.
Press
.
a "Discard" or "Save" appears on the display.
8.
Select "Save" to save the setting.
Note: Your changes to the basic settings will be re-
tained even after a power failure.
13.2 Overview of the basic settings
This is where you can find an overview of the basic set-
tings and factory settings. The basic settings depend
on the features of your appliance.
Notes
¡ Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.
¡ Your changes to the basic settings will be retained
even after a power failure. Only the settings pertain-
ing to the initial start-up of the appliance need to be
implemented once again following a power failure.
→ "Initial use", Page 40
Basic settings Selection
Language
Set "Language"
Time
Set "Time "
1
Factory setting (may vary according to model)
14 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
14.1 Cleaning products
Only use suitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
46
to se-
12.3 Cancelling the timer
▶
Reset the timer duration.
a Once this is implemented, the symbol no longer
lights up.
Basic settings Selection
Date
Audible signal
Button tone
Display bright-
ness
Clock display
Night-time dim-
ming
Demo mode
Factory set-
tings
1
Factory setting (may vary according to model)
Note: Changes to the language, button tone and dis-
play brightness settings take effect immediately. All
other settings do not take effect until you save them.
13.3 Changing the time
1.
Press
2.
Press
a The operating modes menu opens.
3.
Use the rotary selector to select "Settings".
4.
Use to navigate to "Time ".
5.
Use the rotary selector to change the time.
6.
Press
7.
Select "Save" to save the setting.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
▶
Do not use harsh or abrasive cleaning products.
▶
Do not use cleaning products with a high alcohol
content.
▶
Do not use hard scouring pads or cleaning
sponges.
▶
Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
Set "Date"
Short cooking time
Medium cooking time
Long cooking time
1
Switched off
Switched on
The display brightness can be adjus-
ted in 5 settings
1
Setting 3
Digital + date
Digital
1
Off
1
Switched off
Switched on (display dimmed
between 10 p.m. and 6 a.m.)
1
Switched off
Switched on (this is only displayed in
the first 3 minutes following a reset
or the initial start-up)
Reset
1
Do not reset
.
.
.
1
Publicidad
