Publicidad
Idiomas disponibles
Idiomas disponibles
CARE & STORAGE GUIDELINES
Proper storage
Preparing your Multifunctional steam mop for storage is quick and
simple. When you have finished your steaming tasks, follow the steps
listed below.
1. Unplug power cord from electrical outlet.
2. Allow unit time to cool (at least 5 minutes).
3. Remove all accessories from unit.
4. Remove Water Tank Cap and drain any remaining water from
Water Tank into a sink or tub to minimize potential mineral build-up.
Replace Water Tank Cap when done.
5. Collapse Extension Pole to shortest length (if storage space is
limited), and wrap power cord around Cord Brackets.
6. Store Multifunctional steam mop in a cool, dry location, along with
all attachments.
REMOVING MINERAL BUILD-UP
A common maintenance need for steam appliances is the removal of
building-up caused by high mineral content in many municipal water
supplies. This mineral build-up may limit the effectiveness and reduce
the life of your Multifunctional steam mop.
The best way to minimize mineral build-up is to use distilled or
de-mineralized water when using your Multifunctional steam
mop. In addition, it is recommended that the cleaning procedure below
be followed at least once a month in order to remove any deposits that
form. This will help to extend the life of your Multifunctional steam mop
and keep it functioning at its maximum potential.
1. Follow STEPS 1-4 under Proper Storage section above. However,
do not replace Water
Tank Cap at the end of STEP 4.
2. Insert Cleaning Pin into opening of Steam Nozzle to remove
mineral. This may also be done to clean accessories such as the
Concentration nozzle or mop head.
Publicidad
