Philips HomeRun Aqua 3000 Serie Manual De Instrucciones página 11

English
14
Tell your robot where not to clean with restricted cleaning
zones
-
Open all in-house doors and close doors to the outside.
Important: Make sure the robot cannot get blocked during use.
Creating a map
Important: During mapping your robot will not clean.
Important: To create a map of a floor, it is very important to place the station
on the floor that you want to map because the robot must be in the station
when starting and ending the mapping. If you want to create a map of the 2nd
floor, the station must be placed there during the mapping process. Thereafter
the map of this floor can be used even if the station is on another floor.
In the app you can set up restricted areas to indicate where the robot is allowed
to clean and where it is not.
Virtual wall and No-Go zone
Create virtual walls and No-Go zones
to go. You can for example create virtual walls or No-Go zones to:
-
Protect fragile objects. The robot cannot detect small obstacles like shoes,
toys or cables, nor can it detect shiny, transparent (e.g. glass) or dark
obstacles or surfaces.
-
Prevent the robot from getting stuck while cleaning.
Note: The robot can get stuck on high pile carpets, carpets with fringes or
or very light rugs like in the bathroom. Also the robot cannot detect cables on
the floor.
-
Protect the robot.
Note: The robot should be kept away from liquids and wet areas such as
pet bowls and plant trays.
Important: virtual walls and No-Go zones should not be used to protect
against hazards.
Important: virtual walls and No-Go zones should not prevent the robot from
returning to the station.
for areas you do not want the robot