STAMOS PROXUS 200D Manual De Instrucciones página 36

Pulse mode
Pulse mode only works in the synergy mode.
1. No pulse.
2. Single impulse.
3. Double impulse.
Material selection
The machine can weld 5 types of materials. Press the
button to select the appropriate materials.
Welding Cu-Si must be done in double pulse mode.
Selecting the wire diameter ("Wire diameter")
Press the button to select the wire diameter
installed in the machine (0.8/1.0/1.2 mm).
Selecting the wire feed speed ("Feeding speed")
Adjust the wire feed speed until the value in the
upper left corner matches the actual wire thickness
on the machine.