Kärcher BR 30/1 C Bp Manual De Instrucciones página 12

ATTENTION
Fresh or waste water tank not insert-
ed
Material damage
Before starting the cleaning work,
make sure that the fresh water tank is
filled with water, and the waste water
tank is inserted in the device.
1. Remove the cleaning rollers from
the device (see chapter Cleaning
the cleaning rollers).
2. Moisten the cleaning rollers with
fresh water.
3. Mount the cleaning rollers.
4. Press the ON / OFF switch.
The device switches on.
5. Activate the boost function to clean
stubborn dirt (see chapter General
information on operation).
Emptying the waste water tank
● Empty the waste water tank as soon
as the fresh water tank is empty, or if
the device no longer absorbs mois-
ture and there is water left on the
floor.
12
1. Press the ON / OFF switch.
The device switches off.
2. Set the device to its parking position
(see chapter General information
on operation).
3. Disengage the two locking flaps on
the device.
The waste water tank detaches from
the device.
4. Lift the device and set it to one side.
5. When transporting it to a draining ar-
ea, do not hold the waste water tank
by the lid, but position both of your
hands at the sides of the waste wa-
ter tray. Keep the waste water tank
English