Kärcher BR 30/1 C Bp Manual De Instrucciones página 22

gages in place (see chapter
Inserting the battery pack).
The device does not pick up the dirt
There is no water in the fresh water
tank.
 Fill the fresh water tank with water
(see chapter Filling the fresh water
tank).
The fresh water tank is not seated
properly in the device.
 Insert the fresh water tank so that it
is firmly seated in the device.
The waste water tank is missing or not
properly seated in the device.
 Check to ensure the lid is correctly
mounted on the waste water tray
(see chapter Cleaning the waste
water tank).
 Insert the waste water tank into the
device and secure it correctly.
The sweep bins are missing or not
properly seated in the waste water
tank.
 Insert the sweep bins correctly into
the waste water tank (see chapter
Cleaning the sweep bins).
The cleaning rollers are missing or not
properly seated in the device.
 Insert the cleaning rollers and screw
them correctly onto the roller drives
(see chapter Cleaning the cleaning
rollers).
The cleaning rollers are dirty or worn.
 Clean or replace the cleaning roll-
ers.
The water distribution strips are dirty.
 Clean the water distribution strips
(see chapter Cleaning the water
distribution strips).
The cleaning rollers are too dry
The cleaning rollers are not sufficiently
moistened.
 Moisten the cleaning rollers by acti-
vating the boost function (see chap-
22
ter General information on
operation).
The fresh water filter is dirty.
 Clean the fresh water filter.
a Remove the fresh water tank (see
chapter Filling the fresh water
tank).
b Remove the fresh water filter.
c Clean the fresh water filter under
running water.
d Assemble in reverse order.
Unsatisfactory cleaning result
The cleaning rollers were not washed
before first use.
 Wash the cleaning rollers at 60 °C in
a washing machine (see chapter
Cleaning the cleaning rollers).
The cleaning rollers are dirty.
 Clean the cleaning rollers.
The cleaning rollers are not sufficiently
moistened.
 Moisten the cleaning rollers by acti-
vating the boost function (see chap-
ter Start working).
The water distribution strips are dirty.
 Clean the water distribution strips
(see chapter Cleaning the water
distribution strips).
The wrong detergent or dosage has
been used.
English