Kärcher BR 30/1 C Bp Manual De Instrucciones página 13

level, otherwise waste water can es-
cape.
6. Empty the waste water tank.
In the case of stubborn dirt, rinse out
the waste water tank with tap water
(see chapter Cleaning the waste
water tank).
7. Clean the sweep bins (see chapter
Cleaning the sweep bins).
8. Insert the waste water tank into the
device in reverse order.
Interrupting operation
ATTENTION
Risk of damage from moisture and
detergent, as well as from the de-
vice tipping over
Risk of damage to sensitive floors and
the cleaning rollers as a result of pro-
longed exposure to moisture and de-
tergents.
Risk of material damage due to the de-
vice tipping over.
Always set the device to its parking po-
sition whenever you take a break and
when you have finished work.
When switching it off, do not lean the
device against walls, doors or other ob-
jects.
1. Press the ON / OFF switch.
The device switches off.
2. Set the device to its parking position
(see chapter General information
on operation).
Rinsing the cleaning rollers
If there is a large accumulation of dirt,
the cleaning rollers can be subjected to
an intermediate cleaning process by
using the rinsing function.
Note
When work is complete, the cleaning
rollers must be removed and cleaned
under running water or washed in a
washing machine before the device is
placed in storage (see chapter Clean-
ing the cleaning rollers). The rinsing
function does not replace the final thor-
ough cleaning process.
English 13