Kärcher BR 30/1 C Bp Manual De Instrucciones página 9

7. Squeeze the round bottle in the mid-
dle until the required amount of de-
tergent has flowed into the dosing
head.
Take the following into account:
a The specifications of the detergent
manufacturer for the mixing ratio
of detergent and fresh water
b The corresponding scale on the
dosing head
c The capacity of the tank
8. Open the cover on the dosing head.
9. Fill the detergent into the tank.
10.Close the lid on the dosing head.
11.Close the tank cap.
12.Insert the fresh water tank into the
device until it engages.
General information on
ATTENTION
Moisture
Material damage to sensitive floors
Before using the device, check the
floor in an inconspicuous place for wa-
ter consistency.
Do not clean any water-sensitive cov-
erings such as untreated cork floors,
as moisture can penetrate and dam-
age the floor.
ATTENTION
Risk of damage from moisture and
detergent, as well as from the de-
vice tipping over
Risk of damage to sensitive floors and
the cleaning rollers as a result of pro-
longed exposure to moisture and de-
tergents.
Risk of material damage due to the de-
vice tipping over.
Always set the device to its parking po-
sition whenever you take a break and
when you have finished work.
When switching it off, do not lean the
device against walls, doors or other ob-
jects.
ATTENTION
Material damage
Material damage to the device from
large, pointed, bulky objects.
Do not use or store the device on hard,
coarse dirt or hard objects, as these
parts could become jammed under-
neath the waste water tank and scratch
the floor and the waste water tank it-
self.
English
Operation
operation
9