Kärcher BR 30/1 C Bp Manual De Instrucciones página 14

1. Press the ON / OFF switch.
The device switches off.
2. Set the device to its parking position
(see chapter General information
on operation).
3. Check the filling level in the fresh
water tank (this must be at least
50%).
If necessary, fill the fresh water tank
accordingly (see chapter Filling the
fresh water tank).
4. Press and hold the boost function
button.
14
5. Press and hold the ON / OFF switch.
The rinsing function is activated af-
ter approx. 3 seconds. The cleaning
rollers are then rotated and rinsed.
The ON / OFF switch flashes.
6. Release the boost function button
and the ON / OFF switch.
7. The device will switch off automati-
cally after approx. 2 minutes.
The rinsing function can be stopped
at any time by pressing the ON /
OFF switch.
8. Empty the waste water tank (see
chapter Emptying the waste water
tank).
9. Check the filling level in the fresh
water tank and fill the tank if neces-
sary (see chapter Filling the fresh
water tank).
Finishing operation
1. Press the ON / OFF switch.
The device switches off.
2. Set the device to its parking position
(see chapter General information
on operation).
English