ABL Wallbox eM4 Twin Instrucciones De Uso página 31

4 Close the RCCB flap again and lock it
with the key.
5 Repeat this process for the second RCCB.
DANGER
Dangerous electrical currents
Should an RCCB malfunction during testing, you must not continue to operate the wallbox
under any circumstances!
x Take the wallbox out of operation (see next section) and contact a qualified specialist
electrical contractor to resolve the error.
Taking the Wallbox eM4 Twin out of operation
In case of severe malfunctions or damage to the device, you must take the Wallbox eM4 Twin out
of operation. To do so, proceed as follows:
1 Unlock the side RCCB flaps using the key
supplied and flip them up.
2 Flip the toggle switches of both RCCBs to
the 0 position.
1
+
0
Taking the Wallbox eM4 Twin out of operation
1
0
|
31