Publicidad
Idiomas disponibles
Idiomas disponibles
No.
Malfunction
DEEBOT gets stuck while
9
working and stops.
During cleaning, DEEBOT
appears in the route disorder,
running bias, repeated
cleaning, small area leakage
10
and so on.
(If there is a large area that has
not been swept temporarily,
DEEBOT will make up the
leakage independently. )
EN
32
Possible Causes
DEEBOT is tangled with something on the oor
(electrical wires, curtains, carpet fringing, etc.).
DEEBOT might be stuck under furniture with
an entrance of similar height.
Objects such as wires and slippers placed
on the ground affect the normal operation of
DEEBOT.
It may be that the Driving Wheels slips on
the ground when DEEBOT climbs steps,
thresholds and door bars, thus affecting the
its judgment of the whole house environment.
Work on freshly waxed and polished oors or
smooth tiles, resulting in less friction between
the Driving Wheels and the oor.
Due to different home environments, some
areas cannot be cleaned.
The TrueMapping Distance Sensor is dirty or
blocked by foreign matters.
Solutions
DEEBOT will try various ways to free itself. If it is
unsuccessful, manually remove the obstacles and restart.
Please set a physical barrier, or set a Virtual Boundary via
the ECOVACS HOME App.
Please tidy up the scattered wires, slippers and other
objects on the ground before cleaning. And reduce the
scattered objects on the ground as far as possible. If there
is any area leakage, DEEBOT will correct the leakage by
itself, please do not interfere (such as moving DEEBOT or
blocking the route).
It is recommended to close the door of this area and clean
the area separately. After cleaning, DEEBOT will return to
the starting location. Please rest assured to use.
Please wait for wax to dry before cleaning.
Clean the home environment to ensure that DEEBOT can
enter for cleaning.
Wipe the TrueMapping Distance Sensor with a clean soft
cloth or remove foreign matters.
Publicidad
