Descargar Imprimir esta página

ECOVACS DEEBOT T20 OMNI Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
25. Do not use the OMNI Station if it is damaged.
The power supply is not to be repaired and not to
be used any longer if it is damaged or defective.
26. Do not use with a damaged power cord or
receptacle. Do not use the Appliance or OMNI
Station if it is not working properly, has been
dropped, damaged, left outdoors, or come in
contact with water. It must be repaired by the
manufacturer or its service agent in order to
avoid a hazard.
27. The plug must be removed from the
receptacle before cleaning or maintaining the
OMNI Station.
28. Remove the Appliance from the OMNI
Station, and turn OFF the power switch to
the Appliance before removing the battery for
disposal of the Appliance.
29. When not using the OMNI Station for a long
period of time, please unplug it.
30. If the robot will not be used for a long time,
power OFF the robot for storage and unplug
the OMNI Station.
31. WARNING-Add clean water into the clean
tank only.
32. WARNING: For the purposes of recharging
the battery, only use the detachable supply
unit CH2232 provided with the Appliance.
To satisfy RF exposure requirements, a separation
distance of 20 cm or more should be maintained
between this device and persons during device
operation.
To ensure compliance, operations at closer than
this distance is not recommended. The antenna
used for this transmitter must not be co-located in
conjunction with any other antenna or transmitter.
Device Update
Typically, some devices are updated bi-monthly,
but not always so specific.
Some devices, especially those that went on sale
more than three years ago, will only be updated if
a critical vulnerability is found and fixed.
5 EN

Publicidad

loading