Publicidad
Idiomas disponibles
Idiomas disponibles
4
34
En
All manuals and user guides at all-guides.com
Getting Started
– 4 searches for the previous blank space between tracks on
the side currently playing (in other words, to the start of the
current track), then resumes playback.
By pressing – 4 or ¢ + more than once, the player will
skip several tracks at once (to a maximum of 15). For example,
press ¢ + twice to skip forward two tracks.
Note: Track search is unlikely to work reliably in the following
cases:
• if the space between tracks is less than about 4 seconds.
• if the recording is particularly noisy so the spaces are not
recognized.
• if the recording contains frequent silences, such as a language
study tape.
• if the recording contains sections of very quiet material, such
as some classical music recordings.
8 To stop playback, press 7.
9 To fast wind the tape, press 1 or ¡.
On the front panel, press –·1/4 or ¢/¡·+ (the
tape should be stopped when you do this).
1 rewinds the tape, regardless of the tape direction at the time.
¡ forward-winds the tape.
Resetting the tape counter
The tape counter indicates the current location of the tape. The
counter increases when the tape is travelling forwards and
decreases when it's travelling in reverse (playing or fast winding).
The tape counter returns to zero automatically when you eject a
tape. To reset it manually:
• Press 7 while the tape is stopped.
The counter returns to 0000.
Relay play
XR-A790: Both tape decks are auto-reverse and will play a tape
repeatedly until you press 7 or the tape has played eight times all
the way through. If two tapes are loaded, each will be played
alternately (for a maximum of eight times through each tape).
XR-A390: Deck I plays only in the 3 (forward) direction. Deck II
is auto-reverse and will play a tape repeatedly until you press 7 or
the tape has played eight times all the way through. If two tapes
are loaded, then the tape in deck II will play repeatedly.
Publicidad
