Publicidad
General
We appreciate your choice of a new product from R82 - a worldwide supplier of technical aids and
appliances for children and adults with special needs. To fully benefit from the options offered by this
product please read this User Manual before use and save it for future reference.
Intended purpose
Chair for children and adults with disabilities.
Indications
The device can be used by children and adults
with disabilities, who lack the ability to maintain
a seated position. The target group for the device
is based on functional ability and not a specific
health condition or age.
The user is the person sitting in the device. The
caregiver is the person operating the device.
Never leave the user unattended in this device.
Ensure permanent supervision by a caregiver.
The use of the device will be discontinued
multiple times during the day where the user
will be lying down, standing or sitting in another
assistive device or a conventional product.
Contraindications
There are no known contra indications.
Precautions
Special attention should be given to the
considerations about the configuration of the
device and the use of accessories for users with
limitation in their:
• sensory functions and the sensation of
pain consider extra checks of the pressure
caused by the support provided by the
device and its accessories.
• movement function (e.g. experience
involuntary movements), consider using a
device with a dynamic backrest.
• ability to maintain a seated position, use the
device with accessories (e.g. side supports,
vests, belts or arm supports and a tray).
• ability to maintain the position of their head,
consider using accessories that provide
support to the positioning of the head.
Applicaton areas
For indoor use.
Enclosed tools:
Wombat Living 1 & 2
• 3, 4 & 5 mm Allen key
Wombat Living 3
• 3, 4, 5 & 6 mm Allen key
• 10 mm spanner
Declaration of Conformity
This product conforms to the requirements of the
Medical Devices Regulation (2017/745). Further,
this product conforms to the requirements
EN
ENGLISH
according to:
• High-low:xo indoor: EN 12182
• High-low:xo outdoor: EN 12182 & EN 12183
The CE mark must be removed when:
• Rebuilding the product
• Using the product outside the intended
purpose and declaration of conformity
• Using other than original R82 spare parts
and fittings
When combining the device with other products,
the combination must not change the intended
purpose of the products or modify the products in
such a way that compliance with the applicable
requirements may be affected. The person /
company responsible for the combination of
the products must ensure that the applicable
requirements are fulfilled.
Applicable requirements examples:
• Alignment of user weight/mass of the
combined seat and base, approval for
transportation in vehicles of both products
(ISO16840-4 for seat and ISO7176-19 for
base)
• Material safety (biocompatibility,
flammability), mechanical safety (stability,
squeezing hazards, inter connection),
electrical safety
Disposal
When a product reaches the end of its lifetime,
it should be separated by material type so that
the parts can be recycled or disposed of properly.
If required, please contact your local dealer for
a precise description of each material. Please
contact your local authorities to be informed
of the options available for recycling in an
environmentally-friendly way.
Accessories and spare parts
The products from R82 can be supplied with a
variety of accessories including vests and belts
which comply with the needs of the individual
user. Spare parts can be ordered on request.
Find the specific accessories on our website or
contact your local dealer for further information.
R82 Warranty
www.etac.com/support
Presales information and instructions
Presales information and instructions are
available at www.etac.com, under your product,
in the documents section.
46
etac.com
Publicidad
