Publicidad
Layout
Fig. 4-7
BALANCING
Balancing Screen.
Open with the BALANCING key (5, Fig. 4-5).
Commands:
1 - HELP key - For selecting HELP texts.
2 - HOME key - Returns you to the starting page
(INTRO SCREEN).
3 - START key - Starts the measuring run.
4 - ESC key - To exit the option being executed or
displayed.
4
1
2
3
5
5 - OPT/MIN key - Starts the Optimisation / Minimisation
program.
6 - SPLIT key - Starts the procedure for splitting the
wheel weight, to be applied behind the spokes.
5
6
7 - FINE key - Increases the resolution of the values
shown, for reading remaining unbalances.
8 - STATIC key - For retrieving static balancing. Press
again to restore dynamic balancing.
7
8
9
9 - LASER POINTER key - Enables relocation of the
wheel weight in Laser Pointer mode. Press again to
confi rm the position change.
10
11
10 - FREEZE WHEEL DATA key - Size data for the
wheel being processed are saved so that they can be
used with subsequent wheels of the same size (set of
wheels). This allows a shorter run.
11 - RIM DATA ENTRY key - To go to the Rim data
12
entry screen page.
12 - WAP key - The key is at the imbalance value.
13
Press to automatically index the wheel to the weights
application position; the wheel starts to reach and stop
at the WAP position of that plane.
4-7
13 - "G / OZ" key - For selecting readings in grams
or ounces.
24
Publicidad
