Tabla De Contenido; Specification; M/S - Triton TA 1200BS Instrucciones De Uso

Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this product. This product has unique
features and, even if you are familiar with similar products, it is necessary to read this manual carefully to ensure you fully understand the instructions. Ensure all
CONTENTS
Specification
Product Familiarisation
Description of Symbols
General Safety
Sanding Tool Safety
Intended Use
Unpacking Your Tool

SPECIFICATION

Model no:
Voltage:
Input power:
No load speed:
Protection class:
Sanding area:
Sanding belt dimensions:
Weight:
Sound and vibration information:
Sound pressure LPA:
Sound power LWA:
Uncertainty K:
Weighted vibration ah:
Uncertainty K:
As part of our ongoing product development, specifications of Triton products may alter without notice.
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the time of exposure if necessary. If sound levels are uncomfortable, even
with ear protection, stop using the tool immediately and check the ear protection is correctly fitted and provides the correct level of sound attenuation for the level
of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness, tingling and reduced ability to grip. Long term exposure can lead to
a chronic condition. If necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures provided in the specification relating to vibration to calculate the duration and
frequency of operating the tool.
GB Sound and vibration levels in the specification are determined according to EN60745 or similar international standards. The figures represent normal use for the
tool in normal working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce increased levels of noise and vibration. www.osha.
europa.eu provides information on sound and vibration levels in the workplace that may be useful to domestic users who use tools for long periods of time.
2 Contents / Specification
users of the tool read and fully understand this manual.
2
3
4
4
4
5
5
TA1200BS
EU - 220 - 240V AC, 50Hz
SA - 220 - 240V AC, 50/60Hz
AU - 220 - 240V AC, 50/60Hz
JP - 100V AC, 50/60Hz
USA/CAN - 120V AC, 60Hz
1200W (1.6hp)
200−450min
76 x 150mm (3" x 6")
76 x 533mm (3" x 21")
4.8kg (10.6lb)
90dB(A)
101dB(A)
3dB
2.2m/s

1.5m/s

Before Use 5
Operation 6
Accessories 7
Maintenance 8
Disposal 8
Guarantee 9
-1
2
2