Publicidad
On the display you will see the set time, the temperature and function. The oven
light turns off. Now select an available cooking function with the < and > keys.
The oven suggests a preset temperature for each function, which can be changed
by using the keys
and
.
Once the 2 dots have stopped blinking, the oven begins the delayed start mode: it
will automatically start for the requested duration and stop at the requested time.
When the oven is cooking, you see the selected temperature, the current hour and
the selected function on the corresponding displays. The internal oven light turns
off.
However, both the temperature and the function can be changed by repeating the
above mentioned instructions.
At the end of the program, the oven beeps, the temperature display and the cooking
function display turn off, the timer display shows the current hour and the 2 symbols
and A blink.
To stop the soud signal or to cancel the program just push one of the following keys
The symbol
appears on the function display and then the oven light turns on.
Now the oven is ready to be programmed again; you can select a new cooking
function or switch the oven off by pressing and releasing the key ON/OFF.
AUTOMATIC AND SEMIAUTOMATIC COOKING RESTRICTIONS
The preheating (PRH) and defrosting functions are not compatible with the above
mentioned automatic and semiautomatic operation.
-After setting the preheating or the defrosting function, it is not possible to set either
the duration or the end of cooking.
-When programming the oven with the automatic operation, you cannot choose the
preheating or the defrosting function.
40
Publicidad
