Publicidad
Idiomas disponibles
Idiomas disponibles
A
*
Grass Shield
:
The grass shield may only be used
together with the 2.4 in (60 mm)
diameter thrust plate (A) and the
deflector for mowing heads.
*
see "Guide to Using this Manual"
FS 500, FS 550
7
STIHL AutoCut
STIHL TrimCut
:
Block the output shaft with the stop
pin.
:
Screw cutting head
counterclockwise onto the output
shaft (7) and
Important: Remove the stop pin.
Removing the mowing head
:
Block the output shaft.
:
Unscrew the mowing head
clockwise.
English / USA
4
6
STIHL PolyCut 40-3
:
Block the output shaft with the stop
pin.
:
Position the mowing head on the
shaft.
:
Fit the 2.4 in (60 mm) diameter
thrust washer (6) –
convex side must face down.
:
Screw on nut (4) counterclockwise
and tighten down firmly.
Important: Remove the stop pin.
Removing the mowing head
:
Block the output shaft.
:
Unscrew the nut clockwise.
If the mounting nut is too loose (cannot
be tightened properly), fit a new one.
21
Publicidad
