Publicidad
Idiomas disponibles
Idiomas disponibles
English / USA
Balancing the Machine
:
Attach machine to the harness. Let
it go and check to see how it is
balanced – change the attachment
point of the spring hook as
necessary:
Mowing tools (mowing heads,
grass cutting blades, brush knives,
Shredder blades) should just touch
the ground (top illustration).
Circular saw blades should
"hover" about 20 cm (8 in) above
the ground (bottom illustration).
26
Starting / Stopping the
Engine
3
2
:
Observe safety precautions – see
chapter "Safety Precautions and
working techniques" in this manual.
:
Hold down the throttle trigger
interlock (1) and squeeze the
throttle trigger (2).
:
While holding both levers in this
position, move slide control (3) to
START and hold it there.
:
Now release the throttle trigger,
slide control and trigger interlock in
that order. This is the starting
throttle position.
1
:
Set the choke knob (4):
For cold start, turn counter-
clockwise to g.
For warm start, turn clockwise
away from g (also use this setting
if engine has been running but is still
cold).
:
Press the fuel pump bulb (5) at least
five times – even if the bulb is filled
with fuel.
:
Press the decompression valve
button (6). Press this button before
each starting attempt.
4
5
6
FS 500, FS 550
Publicidad
