Publicidad
Idiomas disponibles
Idiomas disponibles
A
3
2
Change the fuel pickup body
once every year
:
Drain the fuel tank.
:
Set the choke knob to g.
:
Remove carburetor box cover (1).
:
Pry grommet (2) with fuel hose out
of the tank.
:
Remove the fuel pickup body (3).
:
Push new pickup body into the hose
and place it in the tank. The
distance between the bottom of the
grommet and the stop of the pickup
body is A = 1.6 in (40 mm).
FS 500, FS 550
:
Push grommet home and check that
it is properly seated.
:
Fit the carburetor box cover.
1
English / USA
Fitting the Harness
2
3
:
Put on the full harness (1).
:
Adjust length until the spring hook
(2) is about a hand's width below
your right hip. Over-long straps can
be cut to length after making the
adjustments.
:
Attach the spring hook to the
machine's perforated strip (3).
Find the right attachment point for the
cutting tool you are using – see section
"Balancing the Machine".
1
25
Publicidad
